Strong Metal-support Interaction Research Articles

Tuning the strong metal support interaction of the Fischer-Tropsch synthesis silica-coated cobalt-based nano-catalyst

The catalyst is crucial in enhancing productivity within the Fischer-Tropsch synthesis (FTS). The metal support interaction (MSI) plays a pivotal role in the FTS catalyst performance, impacting activity, stability, and selectivity. he configuration and composition of the catalyst dramatically impact MSI, with a strong MSI (SMSI) specified for the core-shell structure. In this study, two methods consisting of chemical treatment of etching and adding a promoter (Ru) for tuning the SMSI of the FTS catalyst are presented, and their footprints on the catalysts’ performance are screened by utilizing various characterization tests, molecular dynamic simulation, and catalytic tests. It is recognized that the silica interfacial perimeter acts as a barrier that restricts the charge transfer and boosts the SMSI in the silica-coated catalyst. Conversely, the etched catalyst exhibits a moderate MSI, contributing to increased reducibility, stability, and activity. Furthermore, the Ru-doped etched catalyst represents the optimum MSI, resulting in the highest overall performance.

Electrostatic Self-assembly Synthesis of Pd/In2O3 Nanocatalysts with Improved Performance Toward CO2 Hydrogenation to Methanol.

CO2 hydrogenation to methanol has emerged as a promising strategy for achieving carbon neutrality and mitigating global warming, in which the supported Pd/In2O3 catalysts are attracting great attention due to their high selectivity. Nonetheless, conventional impregnation methods induce strong metal-support interaction (SMSI) between Pd and In2O3, which leads to the excessive reduction of In2O3 and the formation of undesirable PdIn alloy in hydrogen-rich atmospheres. Herein, we innovatively synthesized Pd/In2O3 nanocatalysts by the electrostatic self-assembly process between surface-modified composite precursors with opposite charges. And the organic ligands concurrently serve as Pd nanoparticle protective agents. The resultant Pd/In2O3 nanocatalyst demonstrates the homogeneous distribution of Pd nanoparticles with controllable sizes on In2O3 supports and the limited formation of PdIn alloy. As a result, it exhibits superior selectivity and stability compared to the counterparts synthesized by the conventional impregnation procedure. Typically, it attains a maximum methanol space-time yield of 0.54 gMeOH h-1gcat-1 (300 °C, 3.5 MPa, 21,000 mL gcat-1 h-1). Notably, the correlation characterization results reveal the significant effect of small-size, highly dispersed Pd nanoparticles in mitigating MSI. These results provide an alternative strategy for synthesizing highly efficient Pd/In2O3 catalysts and offer a new insight into the strong metal-support interaction.

Photocatalytic CO2 methanation over the Ni/SiO2 catalysts for performance enhancement

CO2 methanation produces synthetic natural gas, which reduces CO2 emission and generates sustainable energy. Exploring effective approach and developing high performance Ni catalysts are the main focus for the reaction. In this study, we report photocatalytic methanation over Ni/SiO2 catalysts. Through physicochemical properties of BET, XRD, H2-TPR and TEM, optical properties of UV-visual light absorbance and light-illuminated H2-TPR, and the performance of photocatalytic methanation, the structure-performance relationship is tentatively discussed. The strong absorbance of light, the small size of Ni nanoparticles and the strong metal-support interaction of the Ni/SiO2 catalysts, as well as the low activation energy of CH4 production, are correlated to the enhanced photocatalytic performance compared to the conventional catalytic performance. The photocatalytic pathway of methanation on Ni nanoparticles are suggested to understand the enhanced performance. The work demonstrates the higher photocatalytic methanation performance than conventional catalytic methanation, which is applicable for other reactions using photo-sensitive catalysts.

TiO2 nanolayer coated carbon support for highly durable high-temperature polymer electrolyte membrane fuel cell cathode

Carbon corrosion of Pt/C electrocatalyst in the cathode is a critical issue for the practical application of high-temperature polymer electrolyte membrane fuel cells (HT-PEMFCs). Herein, we introduce a nanolayer composed of TiO2 nanoparticles between Pt and carbon support, which not only protects the carbon from corrosion but also forms a strong metal-support interaction between Pt and TiO2. The Pt nanoparticles are uniformly dispersed on the prepared C@TiO2 support (mean size: 2.27 nm). After potential sweeping for 5000 cycles in the acid solution, the electrochemical surface area loss of the homemade Pt/C@TiO2 is 10.9%, which is approximately half of that of commercial Pt/C (19.1%). In the practical HT-PEMFC single cell, Pt/C@TiO2 exhibits superior durability than Pt/C as well. After the accelerated durability test, the maximum power density of Pt/C@TiO2-MEA decreases by 8.6%, which is significantly lower than that of Pt/C-MEA (23.9%), suggesting a great potential application of Pt/C@TiO2 in HT-PEMFCs.

Highly dispersed active sites and strong metal-support interaction for boosting CO2 hydrogenation to methanol

Highly dispersed active sites and strong metal-support interaction for boosting CO2 hydrogenation to methanol

Unique role of silica in MOF-Derived High-Loading Palladium-on-Ceria single atom catalysts with excellent efficiency and durability

In most cases, the sintering tendency of supported metal single atoms could be attributed to the unstable structural characteristics of supports in demanding operating conditions, particularly for high-loading single-atom catalysts (SACs), ultimately resulting in deactivation. To address this issue, SiO2 is employed to enhance the structural stability of both supports and the supported Pd single atoms. SiO2 serves not only to prevent the collapse of support structures but also to promote the activation of surface oxygen species by facilitating electron transfer with the supports. This, in turn, establishes strong metal-support interactions (MSIs) to stabilize and activate atomically dispersed Pd species. Additionally, the electrons donated from Ce-O and Si-O to Pd atoms further catalyze the formation of oxygen vacancies, ultimately leading to significantly improved activity and durability in CO oxidation. Without SiO2, the instability of support structure, coupled with the weak MSIs, promotes the aggregation of Pd atoms, resulting in relatively lower catalytic activity and durability.

Non-Photochemical Origin of Selectivity Difference between Light and Dark Catalytic Conditions.

The interest in introducing light into heterogeneous catalysis is driven not only by the urgent need of replacing fossil energy but also by the promise of controlling product selectivity by light. The product selectivity differences observed in recent studies between light and dark reactions are often attributed to photochemical effects. Here, we report the discovery of a non-photochemical origin of selectivity difference, at essentially the same CO2 conversion rate, between photothermal and thermal CO2 hydrogenation reactions over a Ru/TiO2-x catalyst. While the presence of the photochemical effect from ultraviolet light is confirmed, it merely enhances the catalytic activity. Systematic investigation reveals that the gradual formation of an adsorbate-mediated strong metal-support interaction under catalytic conditions is responsible for the variation in the catalytic selectivity. We demonstrate that differences in product selectivity under light/dark reactions do not necessarily originate from photochemical effects. Our study refines the basis for determining photochemical effects and highlights the importance of excluding non-photochemical effects in mechanistic studies of light-controlled product selectivity.

Highly Active and Sintering-Resistant Pt Clusters Supported on FeOx-Hydroxyapatite Achieved by Tailoring Strong Metal-Support Interactions.

The catalytic performance of supported metal catalysts is closely related to their structure. While Pt-based catalysts are widely used in many catalytic reactions because of their exceptional intrinsic activity, they tend to deactivate in high-temperature reactions, requiring a tedious and expensive regeneration process. The strong metal-support interaction (SMSI) is a promising strategy to improve the stability of supported metal nanoparticles, but often at the price of the activity due to either the coverage of the active sites by support overlay and/or the too-strong metal-support bonding. Herein, we newly constructed a supported Pt cluster catalyst by introducing FeOx into hydroxyapatite (HAP) support to fine-tune the SMSIs. The catalyst exhibited not only high catalytic activity but also sintering resistance, without deactivation in a 100 h test for catalytic CO oxidation. Detailed characterizations reveal that FeOx introduced into HAP weaken the strong covalent metal-support interaction (CMSI) between Pt and FeOx while simultaneously inhibiting the oxidative strong metal-support interaction (OMSI) between Pt and HAP, giving rise to both high activity and thermal stability of the supported Pt clusters.

Promote the efficient co-combustion of toluene & CO in Pt/CeO2 catalyst: Orientally adjusting the oxidized SMSI to optimize acid site and oxygen vacancy

By effectively controlling the strong metal-support interaction (SMSI), the formation of acid sites and oxygen vacancies (Ov) on the Pt/CeO2 catalyst was optimized. The efficient co-combustion of toluene and CO on Pt/CeO2-450 was achieved. In the dual-pollutant system, when the conversion rate was 90 %, the corresponding conversion temperatures of toluene and CO were 165 °C and 173 °C, respectively. With the increase of SMSI, the catalytic activity of Pt/CeO2 showed a trend of first increase and then decrease. This was proportional to the content of weak acid sites, medium acid sites, and Ov generated on their surfaces. Compared with the combustion of a single pollutant, the result displays that toluene and CO had significant competitive adsorption on Pt/CeO2. The inhibition of toluene on CO also showed the same trend as the catalytic activity with the increase of SMSI. Under the double inhibition, Pt/CeO2 exhibited preferential selectivity for toluene combustion. However, the in situ DRIFTS results showed that this competitive adsorption phenomenon did not interfere with the combustion reaction path. The co-combustion of toluene and CO follows independent reaction paths. This work provides valuable insights and ideas for realizing the development of efficient and environmentally friendly catalysts through SMSI regulation.

Coupling phyllosilicate and NiCo alloy nanoparticles on sepiolite to enhance stability for hydrogen production by ethanol steam reforming

For hydrogen production from ethanol steam reforming (ESR), The NiCo alloy immobilized on sepiolite (SEP) support by a phyllosilicate precursor was deemed as an effective strategy to improved catalyst stability. The Ni/Co ratio was regulated to optimized the ESR reactivity of the bi-metallic catalysts prepared by the NH4F assisted urea hydrothermal method. The synergy effect of NiCo alloy with a Ni-rich surface on ESR reactivity and anti-deactivation was investigated. The 5Ni10Co/SEP catalyst presented the highest conversion (99.4 %) and H2 yield (68.2 %) at 700 °C, which was benefited from the downsized nanoparticle size and strong metal-support interaction. The proposal structure-activity relationship suggested that the NiCo alloy was exsolved from the phyllosilicate precursor grafted on SEP framework, providing an excellent mitigation for metal sintering. In addition, the synergy of NiCo alloy was elaborated by a combination of enhanced ethanol adsorption/dissociation on Ni sites and restrained methanation on Co sites, offering a 50 h catalyst stability during ESR consisting of the ethanol dehydration route. The developed NiCo alloy catalyst based on SEP support with phyllosilicate precursor provided a prospect on the application to H2 production from ESR over the bimetallic catalysts with simple preparation, high economy and structure stability.

Study on the effect of promotors in CO2 utilization for syngas production via dry reforming of methane over Co-MOX/TiO2-Al2O3 (MOX = La, Ce, Mg, and K) catalysts

In this study, Co-based catalysts supported over Ti-Al oxide and promoted with La, Ce, Mg, and K metals were assessed for CO2 reforming of methane reaction to produce syngas. Titania-alumina mixed oxide supports were prepared using the template-assisted-solvothermal method, and then Co and promotors were co-impregnated over the as-prepared support. Different characterizations of catalysts showed that variation in promotor metal impacts these catalysts' physical and chemical properties. The Ti-Al oxide support possessed the perfect hexagonal morphology. Potassium-promoted catalysts possessed the highest number of basic sites, whereas the La-promoted catalyst possessed the highest number of acidic sites. La promotion improved the Co dispersion, while Mg promotion enhanced the metal support integration. La-promoted catalysts are deactivated because of active metal oxidation and the generation of hard carbon. The carbon was deposited in all catalysts; however, the activity of the Mg-promoted catalyst was unaffected. The intermediate surface basicity and strong metal support interaction improved the Mg-promoted catalyst's stability. The La and Mg-promoted catalysts possessed lower apparent activation energies.

Solvent-free selective hydrogenation of nitroaromatics to azoxy compounds over Co single atoms decorated on Nb2O5 nanomeshes

The solvent-free selective hydrogenation of nitroaromatics to azoxy compounds is highly important, yet challenging. Herein, we report an efficient strategy to construct individually dispersed Co atoms decorated on niobium pentaoxide nanomeshes with unique geometric and electronic properties. The use of this supported Co single atom catalysts in the selective hydrogenation of nitrobenzene to azoxybenzene results in high catalytic activity and selectivity, with 99% selectivity and 99% conversion within 0.5 h. Remarkably, it delivers an exceptionally high turnover frequency of 40377 h–1, which is amongst similar state-of-the-art catalysts. In addition, it demonstrates remarkable recyclability, reaction scalability, and wide substrate scope. Density functional theory calculations reveal that the catalytic activity and selectivity are significantly promoted by the unique electronic properties and strong electronic metal-support interaction in Co1/Nb2O5. The absence of precious metals, toxic solvents, and reagents makes this catalyst more appealing for synthesizing azoxy compounds from nitroaromatics. Our findings suggest the great potential of this strategy to access single atom catalysts with boosted activity and selectivity, thus offering blueprints for the design of nanomaterials for organocatalysis.

Titania-crystal-phase-engineered strong metal-support interactions and catalysis in CO2 hydrogenation

Tailoring strong metal-support interactions (SMSIs) have been verified to become an efficient strategy for developing novel heterogeneous catalysts. Here, both TiO2 supports (anatase (A) and rutile (R)) were employed to prepare the Pd/TiO2 catalysts and strongly titania-crystal-phase-dependent Pd-TiO2 SMSIs and catalysis in CO2 hydrogenation were observed. A-TiO2 is more facile to undergo Pd-TiO2 SMSIs than R-TiO2, which could be relevant to better reducibility over calcined Pd/A-TiO2C catalyst. Catalytic performance of the Pd/TiO2-R (reduced) catalysts in CO2 hydrogenation are sensitive to the Pd-TiO2 structures, among which the Pd nanoparticles mostly encapsulated by TiO2-x overlayers over Pd/A-TiO2-R catalyst with more prominent SMSIs is more intrinsically active. This could be ascribed to both stronger H-spillover and hydrogenation property and better CO2 activation capacity over Pd/A-TiO2-R catalyst. However, its catalytic activity is seriously restricted by the number of intrinsically active sites due to less exposed Pd atoms to block H2 activation sites. These results clearly demonstrate the crystal-phase engineering as an efficient strategy to tailor the SMSIs for developing improved heterogeneous catalysts.

Core–shell CoN@Co ultra-stable nanoparticles on biochar for contamination remediation in water and soil

Nanomaterials have been extensively employed in various applications over the past several decades, however, the stability of functional nanoparticle catalysts (NPCs) for effective degradation of organic contaminants remains a significant challenge. Herein, we present a cost-effective biochar loaded uniformly dispersed ultra-stable Co nanoparticles with an average diameter of 8 nm as a highly efficient peroxymonosulfate (PMS) activation catalyst. The reactive radicals produced from the catalyst/PMS system are able to degrade several model organic pollutants of environmental and public health concerns, including trichlorobiphenyl, bisphenol A and diethyl phthalate, with less pH limitation and Co2+ leaching. Mechanism investigation demonstrates that the CoN plays the key role in the catalyst stability and PMS activation via acid resistance and electron bridging effects, respectively. Meanwhile, the incorporation of nitrogen (N) and sulfur (S) atoms within the substrate is considered to bolster the adhesion strength between metal nanoparticles and the carbon matrix via strong metal-support interaction. The catalyst was further applied in practical treatment of water and soil polluted by organic pollutants, exhibiting a satisfactory degradation efficiency (> 90% in 60 min) for environmental applications.

Tuning the Structure of Pd@Ni-Co Nanowires and Their Electrochemical Properties.

One-dimensional transition metal materials are promising supports for precious metals used in energy production processes. Due to their electrochemical properties, 3d-group metals (such as Ni, Co, and Fe) can actively interact with catalysts by a strong metal-support interaction. This study shows that changing the Ni:Co ratio makes it possible to modulate the structure of the catalyst supports, which, in turn, provides a tool for designing their electrical and electrochemical properties. For example, Ni1-Co9 shows the highest electrical conductivity (5.8-10-4 S/cm) among all of the materials examined. On the contrary, the Pd@Ni7-Co3 system presents the highest mass activity (>2000 mA mg-1) at 0.7 V, exceeding by several times that of commercial Pt/C (>300 mA mg-1) at the same potential. Our study opens the gateway for applications of bimetallic transition metal nanowires in catalytic conversion and energy production processes.

Strong Interactions between Au Nanoparticles and BiVO4 Photoanode Boosts Hole Extraction for Photoelectrochemical Water Splitting.

Strong metal-support interaction (SMSI) is widely proposed as a key factor in tuning catalytic performances. Herein, the classical SMSI between Au nanoparticles (NPs) and BiVO4 (BVO) supports (Au/BVO-SMSI) is discovered and used innovatively for photoelectrochemical (PEC) water splitting. Owing to the SMSI, the electrons transfer from V4+ to Au NPs, leading to the formation of electron-rich Au species (Auδ-) and strong electronic interaction (i.e., Auδ--Ov-V4+), which readily contributes to extract photogenerated holes and promote charge separation. Benefitted from the SMSI effect, the as-prepared Au/BVO-SMSI photoanode exhibits a superior photocurrent density of 6.25 mA cm-2 at 1.23 V versus the reversible hydrogen electrode after the deposition of FeOOH/NiOOH cocatalysts. This work provides a pioneering view for extending SMSI effect to bimetal oxide supports for PEC water splitting, and guides the interfacial electronic and geometric structure modulation of photoanodes consisting of metal NPs and reducible oxides for improved solar energy conversion efficiency.

Engineering the Metal‐Support Interaction and Oxygen Vacancies on Ru@P‐Fe/Fe3O4 Nanorods for Synergetic Enhanced Electrocatalytic Nitrate‐to‐Ammonia Conversion

AbstractRuthenium (Ru) loaded catalysts show high activity and selectivity for ammonia (NH3) synthesis via electrochemical reduction of nitrate (NO3−), but their practical application is still restricted by their high cost and insufficient stability. Herein, a multi‐component electrocatalyst of Ru nanoclusters loaded on phosphorus‐doped/phosphate‐modified and oxygen vacancy (OV)‐rich Fe/Fe3O4 composite nanorods (Ru@P‐Fe/Fe3O4) to synergistically promote electrocatalytic NO3− reduction reaction (NO3−RR)‐to‐NH3 performance via strong metal‐support interaction (SMSI) is reported. Impressively, the best Ru@P‐Fe/Fe3O4 catalyst exhibits outstanding NO3−RR activity, selectivity, and durability in 0.1 M KNO3 + 0.5 M KOH solution, with an NH3 yield rate of 14.37 ± 0.21 mgNH3 h−1 cm−2 (1710.71 ± 25 mgNH3 h−1 mgRu−1) at −0.75 V versus reversible hydrogen electrode (vs. RHE), an NH3 Faradaic efficiency (FE) of 97.2% at −0.55 V vs. RHE, and a superior stability over 50 h, suppressing most of reported Fe‐based and Ru‐based electrocatalysts. The characterizations and theoretical calculations unveil that the SMSI between Ru nanoclusters and P‐Fe/Fe3O4 composite nanorods can promote the generation of OV, tune the electronic structure of Ru species, and stabilize Ru nanoclusters, thereby reducing the reaction energy barrier of NO3−RR‐to‐NH3, inhibiting the competitive hydrogen evolution reaction, and boosting the NH3 yield rate NH3 FE, and stability.

CO2 Conversion via Low-Temperature RWGS Enabled by Multicomponent Catalysts: Could Transition Metals Outperform Pt?

AbstractIn the context of CO2 valorisation, the reverse water–gas shift reaction (RWGS) is gathering momentum since it represents a direct route for CO2 reduction to CO. The endothermic nature of the reaction posses a challenge when it comes to process energy demand making necessary the design of effective low-temperature RWGS catalysts. Herein, multicomponent Cs-promoted Cu, Ni and Pt catalysts supported on TiO2 have been studied in the low-temperature RWGS. Cs resulted an efficient promoter affecting the redox properties of the different catalysts and favouring a strong metal-support interaction effect thus modulating the catalytic behaviour of the different systems. Positive impact of Cs is shown over the different catalysts and overall, it greatly benefits CO selectivity. For instance, Cs incorporation over Ni/TiO2 catalysts increased CO selectivity from 0 to almost 50%. Pt-based catalysts present the best activity/selectivity balance although CuCs/TiO2 catalyst present comparable catalytic activity to Pt-studied systems reaching commendable activity and CO selectivity levels, being an economically appealing alternative for this process.

Partial Exsolution Enables Superior Bifunctionality of Ir@SrIrO3 for Acidic Overall Water Splitting.

The pursuit of efficient and durable bifunctional electrocatalysts for overall water splitting in acidic media is highly desirable, albeit challenging. SrIrO3 based perovskites are electrochemically active for oxygen evolution reaction (OER), however, their inert activities toward hydrogen evolution reaction (HER) severely restrict the practical implementation in overall water splitting. Herein, an Ir@SrIrO3 heterojunction is newly developed by a partial exsolution approach, ensuring strong metal-support interaction for OER and HER. Notably, the Ir@SrIrO3-175 electrocatalyst, prepared by annealing SrIrO3 in 5% H2 atmosphere at 175 °C, delivers ultralow overpotentials of 229 mV at 10 mAcm-2 for OER and 28 mV at 10 mAcm-2 for HER, surpassing most recently reported bifunctional electrocatalysts. Moreover, the water electrolyzer using the Ir@SrIrO3-175 bifunctional electrocatalyst demonstrates the potential application prospect with high electrochemical performance and excellent durability in acidic environment. Theoretical calculations unveil that constructing Ir@SrIrO3 heterojunction regulates interfacial electronic redistribution, ultimately enabling low energy barriers for both OER and HER.

Silica-modified Pt/TiO2 catalysts with tunable suppression of strong metal–support interaction for cinnamaldehyde hydrogenation

Tuning Strong Metal-support Interactions (SMSI) is a key strategy to obtain highly active catalysts, but conventional methods usually enable TiOx encapsulation of noble metal components to minimize the exposure of noble metals. This study demonstrates a catalyst preparation method to modulate a weak encapsulation of Pt metal nanoparticles (NPs) with the supported TiO2, achieving the moderate suppression of SMSI effects. The introduction of silica inhibits this encapsulation, as reflected in the characterization results such as XPS and HRTEM, while the Ti4+ to Ti3+ conversion due to SMSI can still be found on the support surface. Furthermore, the hydrogenation of cinnamaldehyde (CAL) as a probe reaction revealed that once this encapsulation behavior was suppressed, the adsorption capacity of the catalyst for small molecules like H2 and CO was enhanced, which thereby improved the catalytic activity and facilitated the hydrogenation of CAL. Meanwhile, the introduction of SiO2 also changed the surface structure of the catalyst, which inhibited the occurrence of the acetal reaction and improved the conversion efficiency of C=O and C=C hydrogenation. Systematic manipulation of SMSI formation and its consequence on the performance in catalytic hydrogenation reactions are discussed.